Cephalexin Tablets for Oral Suspension

If you find any inaccurate information, please let us know by providing your feedback here

Cephalexin Tablets for Oral Suspension

Ước tính: 0 phút đọc, Ngày đăng:

This article is compiled based on the United States Pharmacopeia (USP) – 2025 Edition

Issued and maintained by the United States Pharmacopeial Convention (USP)

DOWNLOAD PDF HERE

1 DEFINITION 

Cephalexin Tablets for Oral Suspension contain NLT 90.0% and NMT 110.0% of the labeled amount of cephalexin (C16H17N3O4S).  

2 IDENTIFICATION 

The retention time of the major peak of the Sample solution corresponds to that of the Standard solution, as obtained in the Assay. 

3 ASSAY 

Procedure 

Mobile phase: 0.985 g/L of sodium 1-pentanesulfonate in a mixture of acetonitrile, methanol, triethylamine, and water (20:10:3:170), adjusted with phosphoric acid to a pH of 3.0 ± 0.1 

Standard stock solution: 1 mg/mL of USP Cephalexin RS in water 

Standard solution: 0.4 mg/mL of cephalexin in Mobile phase from Standard stock solution 

Sample stock solution: Nominally equivalent to 1 mg/mL of cephalexin from combined contents of NLT 20 powdered Tablets for Oral Suspension in water. Pass a portion of the solution through a filter having a 1-µm or finer pore size. 

Sample solution: 0.4 mg/mL of cephalexin in Mobile phase from Sample stock solution 

Chromatographic system 

(See Chromatography 〈621〉, System Suitability.) 

Mode: LC 

Detector: UV 254 nm 

Column: 4.6-mm × 25-cm; packing L1 of low acidity 

Flow rate: 1.5 mL/min 

Injection size: 20 µL 

System suitability 

Sample: Standard solution 

Suitability requirements 

Relative standard deviation: NMT 2.0% 

Analysis 

Samples: Standard solution and Sample solution 

Calculate the percentage of cephalexin (C16H17N3O4S) in each Tablet for Oral Suspension: 

Result = (rU/rS) × (CS/CU) × P × F × 100 

r= peak response from the Sample solution 

rS = peak response from the Standard solution 

CS = concentration of USP Cephalexin RS in the Standard stock solution (mg/mL) 

CU = nominal concentration of cephalexin from the Sample stock solution (mg/mL) 

P = potency of USP Cephalexin RS (µg/mg) 

F = conversion factor, 0.001 mg/µg

Acceptance criteria: 90.0%–110.0% 

4 PERFORMANCE TESTS 

Disintegration 〈701〉: Tablets for Oral Suspension disintegrate in 3 min, using water at 20 ± 5°. 

Dissolution 〈711〉 

Medium: Water; 900 mL 

Apparatus 1: Use 40-mesh cloth and 100 rpm. 

Time: 30 min 

Standard solution: 20 µg/mL of USP Cephalexin RS in Medium 

Sample solution: Pass a portion of the solution under test through a suitable filter. Dilute with Medium, if necessary, to a concentration of about 20 µg/mL. 

Spectrometric conditions 

(See Ultraviolet-Visible Spectroscopy 〈857〉.) 

Mode: UV 

Analytical wavelength: 262 nm 

Analysis 

Samples: Standard solution and Sample solution 

Tolerances: NLT 80% (Q) of the labeled amount of cephalexin (C16H17N3O4S) is dissolved. 

Dispersion Fineness: Place 2 Tablets for Oral Suspension in 100 mL of water, and stir until completely dispersed. A smooth dispersion is obtained that passes through a No. 25 sieve. 

Uniformity of Dosage Units 〈905〉: Meets the requirements 

5 ADDITIONAL REQUIREMENTS 

Packaging and Storage: Preserve in tight containers at controlled room temperature. 

USP Reference Standards 〈11〉 

USP Cephalexin RS 

vui lòng chờ tin đang tải lên

Vui lòng đợi xử lý......

0 SẢN PHẨM
ĐANG MUA
hotline
0927.42.6789