0.01 N Sodium Hydroxide VS
If you find any inaccurate information, please let us know by providing your feedback here
Tóm tắt nội dung
This article is compiled based on the United States Pharmacopeia (USP) – 2025 Edition
Issued and maintained by the United States Pharmacopeial Convention (USP)
Transfer 10 mL of 1 N sodium hydroxide VS to a 1000-mL volumetric flask. Dilute with carbon dioxide-free water to volume.
1 Standardization
See Volumetric Solutions. 1. Introduction.
See Titrimetry (541).
Standardize by one of the following procedures. [NOTE-Other standardization procedures may be used. See Volumetric Solutions. 2. Preparation and Standardization, 2.3 Standardization.]
1.1 Standardization with visual endpoint
Accurately weigh about 50 mg of potassium biphthalate, previously crushed lightly and dried at 120° for 2 h, and dissolve in 75 mL of carbon dioxide-free water. Add 2 drops of phenolphthalein TS, and titrate with the 0.01 N sodium hydroxide solution to the production of a permanent pink color.
▲N = [g KHC8H4O4 x (Assay/100)]/(0.20422 x mL NaOH solution)
where Assay is the content/potency of potassium biphthalate ▲(USP 1-May-2023)
1.2 Standardization with potentiometric endpoint
Accurately weigh about 25 mg of potassium biphthalate, previously crushed lightly and dried at 120° for 2 h, and dissolve in 75 mL of carbon dioxide-free water. Titrate potentiometrically with the 0.01 N sodium hydroxide solution.
▲N = [g KHC8H4O4 x (Assay/100)]/(0.20422 x mL NaOH solution)
where Assay is the content/potency of potassium biphthalate.▲(USP 1-May-2023)
[NOTE-If this volumetric solution is used in a qualitative application such as pH adjustment, dissolution medium, or diluent, its standardization is not required.]
